Four sash multifold windows - 2 left or 2 right

GO TO PRODUCT OPTIONS

4 Sash Multifold – 2 Left or 2 Right Window options available shown below – we can also custom make multifold windows to any design variations or size you require. Pick from our stock variations as shown below.

Do Multifold Window have a Sill?
The Multifold Window system does not use a bottom track. Standard Multifold Windows come with a hardwood sill, if no sill is required 38mm from the height.

Can I have a Servery Sill?
A 360mm wide x 38mm thick Surian Cedar servery can be installed at an additional cost where the window is not exposed to weather and not in a bushfire zone. Serveries finish flush with the inside edge of the jamb leaving 220mm unsupported exterior protrusion. Where no sill or servery sill is provided, a brush seal will be fitted to the underside of the window sashes.

4 Light, 6 Light, 8 Light, Hopscotch and Coathanger Sashes can be used (some size limitations apply), percentage increases are shown below.

ALL PRICES INCLUDE GST.

PRODUCT OPTIONS

Ask a Question

Name *

First

Last

Email *

Confirm Email

Contact number *

Address

Address Line 1

Address Line 2

City

State / Province / Region

Postal Code

Country

Comment or Message *

Send a file

I need to send a file

Single Light Four Sash Multifold Window

1040mm (h) x 1771mm (w)
2 left or 2 right

Single Light Four Sash Multifold Window

1040mm (h) x 2371mm (w)
2 left or 2 right

Single Light Four Sash Multifold Window

1240mm (h) x 1771mm (w)
2 left or 2 right

Single Light Four Sash Multifold Window

1240mm (h) x 1963mm (w)
2 left or 2 right

Single Light Four Sash Multifold Window

1240mm (h) x 2371mm (w)
2 left or 2 right

Single Light Four Sash Multifold Window

1240mm (h) x 3043mm (w)
2 left or 2 right
ONLY AVAILABLE IN SINGLE LIGHT

IMPORTANT NOTES
This size is only available in single light
Bottom guide and track must be used on this option
No sill option for frames that require bottom guide will be supplied on a temporary sill to allow for correct positioning and alignment. This must be removed prior to installation.